Symptom | Cause/Remedy |
|
|
The ACCESS lamp remains on even | • This unit is recording the image you just shot. |
when you stop recording. | t Do not remove the AC adaptor or the battery pack while the lamp is turned on. |
|
|
Recording stops. | • The temperature of this unit is extremely high. |
| t Turn off this unit and leave it for a while in a cool place. |
| • The temperature of this unit is extremely low. |
| t Turn off the unit and take it to a warm place. Leave it there for a while and then |
| turn it back on. |
| • The maximum continuous recordable time is approximately 4,5 hours. |
| • If you keep applying vibration to this unit, recording may stop. |
| • Fragmentation has occurred. |
| t Format this unit by selecting DELETE and then FORMAT. |
|
|
Connecting a computer
Symptom | Cause/Remedy |
|
|
An error message appears when you | t Set the computer display as follows: |
place the supplied | – 1024 ⋅ 768 dots or more, high color (16 bits, 65,000 colors) or more. |
computer. |
|
|
|
The image or sound on this unit | • Depending on the computer you are using, the played back image or sound may |
cannot be played back correctly. | stop temporarily, but this does not affect the images or sound copied to your |
| computer. |
| • Playback software is not installed on your computer. |
| t Install playback software on your computer. |
|
|
The extension of a file is not | t To display the extension, follow the steps below. |
displayed on your computer. | 1In the window folder, click [Tools] t [Folder option...] t [View] tab. |
| 2Under Advanced Settings, uncheck [Hide file extensions for known file types]. |
| 3Click [OK]. |
|
|
23