Connect the DK cable to the AC adaptor/charger.
Connect the DK cable to the DC IN jack on this unit.
Note
You can leave the battery pack installed while operating from AC power. The power supply to the DC IN jack has priority.
To use the AC adaptor/charger from a vehicle power supply
For details, refer to the operating instructions supplied with the AC adaptor/charger.
2
3
4 With the power cord, connect the AC adaptor/charger to a wall outlet.
To connect this unit to a wall outlet
For prolonged operation, such as playing the recorded images, you can operate this unit from a domestic wall outlet without worrying about battery life.
1 Set the mode change switch of the AC adaptor/ charger to VCR/CAMERA.
Note
When the mode change switch is set to CHARGE, there is no power supply.
AC adaptor/charger

Do not short-circuit the DC plug of the AC adaptor/charger or battery terminal with any metallic objects. This may cause a malfunction.

To install the battery pack to this unit

Slide the battery pack in the direction of the b mark on the battery pack.

To remove the battery pack from this unit

Press the BATT RELEASE button of this unit and slide the battery pack in the direction of the arrow.

9