EDGE CROP

Outputs the central portion of the original image by cropping its right and left edges.

bNotes

•When you view a movie recorded in the DVCAM (DV) format with [DV WIDE REC] set to [ON] on a standard 4:3 TV, images of the movie may appear vertically compressed. In such a case, set [DV WIDE CONV] to [LETTER BOX] or [EDGE CROP].

xDV WIDE CONV

You can select a down convert type when you down-covert DV widescreen signal to DV signal.

Use this function for signals outputting from the following output jacks:

–Component (480i)

–S Video

–Audio/Video

BSQUEEZE

Outputs a horizontally compressed image while maintaining its original height.

LETTER BOX

Outputs an image with black bars added to the top and bottom of the original image, while maintaining the original aspect ratio.

EDGE CROP

Outputs the central portion of the original image by cropping its right and left edges.

x SD-SDI SETVIDEO INDEX

Adds a video index signal that includes information on aspect ratio and signal format to SDI output signals. The default setting is [ON].

RP188 ATC

Adds an Ancillary Time Code (ATC) to the SDI output signal. The default setting is [ON].

VITC LINESEL

Selects the vertical blanking interval line of the SD video signal, in which the vertical interval time code (VITC) is

recorded, between 12 and 20. The default setting is 16.i.LINK SETxHDV t DV CONV

When you set this function to [ON], you can convert HDV format signals to DV format signals and output the DV format signals to an external device via the HDV/DV (i.LINK) jack. You can output DV format signals without any format conversion. The default setting is [OFF].

x DOWN CONVERT

 

You can set a down convert type when you

 

 

set [HDV t DV CONV] to [ON] to

 

convert HDV format signals to DV format

Using

signals.

 

B SQUEEZE

the

Outputs a horizontally compressed image

Menu

while maintaining its original height.

 

EDGE CROP

 

Outputs the central portion of the original

 

image by cropping its right and left edges.

 

x DOWN CONV AU

 

B CH1,CH2

 

Outputs audio signals from CH1 and CH2.

 

CH3,CH4

 

Outputs audio signals from CH3 and CH4.

 

bNotes

•When you set [HDV t DV CONV] to [ON] during 4-channel audio recording on an HDV device, only audio in the channel selected in [DOWN CONV AU] is outputted from the HDV/DV (i.LINK) jack.

•For i.LINK connection, see [VCR HDV/DV] (p. 80).

•Disconnect the i.LINK cable before setting [i.LINK SET]. Otherwise, the connected video device may not be able to recognize the video signal from your camcorder.

•Even when you select [CH3,CH4] during HDV2CH recording, only audio in CH1 and

CH2 will be outputted from the HDV/DV (i.LINK) jack.

Continued , 83