Emerson CF200n100 owner manual How to Hang Your Ceiling Fan

Models: CF200n100

1 16
Download 16 pages 51.14 Kb
Page 9
Image 9
How to Hang

BP7354 CF200 9/19/07 11:30 AM Page 9

Manual backgroundManual background 19. The fan comes with blue, black and white leads that are 80” long. Before installing the fan, measure up approxi- mately 6 to 9-inches above top of hanger ball/downrod assembly. Cut off excess leads and strip back insulation 1/2” from end of leads.

Manual backgroundManual background 20. You have now completed the initial assembly of your new ceiling fan. You can now proceed with hanging and wiring your fan.

Manual backgroundManual background 1. Securely attach the hanger bracket to the outlet box using the two screws supplied with the outlet box (Figure 14).

!WARNING

Hanger bracket must seat firmly against outlet box. If the outlet box is recessed, remove wall board until bracket contacts box. If bracket and/or outlet box are not securely attached, the fan could wobble or fall.

How to Hang

Your Ceiling Fan

!WARNING

The fan must be hung with at least 7' of clearance from floor to blades (Figure 13).

CEILING

AT LEAST

7'

FLOOR

Figure 13

!WARNING

The outlet box and joist must be securely mounted and capable of supporting at least 50 lbs. Use only a U.L. outlet box listed as “Acceptable

OUTLET

BOX

TWO SCREWS

 

SUPPLIED

 

WITH

 

OUTLET BOX

HANGER

 

BRACKET

 

TAB

Figure 14

2.Carefully lift the fan and seat the hang- er ball/downrod assembly on the hang- er bracket that was just attached to the outlet box (Figure 15). Be sure the groove in the ball is lined up with the tab on the hanger bracket (Figure 14).

!WARNING

Failure to seat tab in groove could cause damage to electrical wires and possible shock or fire hazard.

NOTE: CEILING COVER, SUPPLY WIRES AND FAN WIRES OMITTED FOR CLARITY.

for Fan Support”.

!WARNING

To reduce the risk of fire, electric shock, or personal injury, mount fan to outlet box marked “Acceptable for Fan Support”, and use screws sup- plied with outlet box. Most outlet boxes commonly used for support of

Figure 15

OUTLET

BOX

HANGER

Manual background BRACKET

Manual background HANGER BALL/ DOWNROD ASSEMBLY

light fixtures are not acceptable for fan support and may need to be replaced. Consult a qualified electri- cian if in doubt.

!WARNING

To avoid possible fire or shock, do not pinch wires between the hanger ball/downrod assembly and hanger bracket.

9

U.L. Model No.: CF200

Page 9
Image 9
Emerson CF200n100 owner manual How to Hang Your Ceiling Fan