Sony hvr-z7e.z7 CH1, CH2, MIX, CH1,CH2, CH3,CH4, BCH1,CH2, BCH1,CH2, AUDIO CH SEL, DV AUDIO MIX, Reproduces sound of CH1 in channels 1 and

Press the MENU button t select the (AUDIO SET) with the SEL/PUSH EXEC dial.

•When recording loud sound, the sound may be distorted at either the input point or the recording point. If it is distorted at the input point, adjust the sound using the INPUT TRIM function. If it is distorted at the recording point, lower the total volume level manually.

•If you set INPUT TRIM too far to the minus side, the microphone volume becomes too low, resulting in a poor signal to noise ratio.

•Test the effect of the INPUT TRIM function according to the microphone used or the sound field of the recording site before actual recording.

AUDIO CH SELBCH1,CH2Reproduces sound of CH1 and CH2 in respective channels.CH1Reproduces sound of CH1 in channels 1 and 2.CH2Reproduces sound of CH2 in channels 1 and 2.

zTips

•When you select [CH1,CH2] and play back a tape on your camcorder, sound of CH1 + CH2 comes out of the speakers.

DV AUDIO MIX

You can monitor the sound dubbed from another device or recorded through 4- channel microphone during playback. You can set how to output the sound.

BCH1,CH2

Outputs only the sound recorded in CH1 and CH2 during recording.MIX

Outputs mixed sound of the sound recorded in CH1 and CH2 during recording and the sound dubbed in CH3 and CH4.

CH3,CH4Outputs only the sound dubbed in CH3 and CH4.

78