12
Step 3: Charging the battery pack
You can charge the “InfoLITHIUM”
battery pack (L series) with the
supplied AC Adaptor/Charger.
bNotes
• You cannot use batteries other than the
“InfoLITHIUM” battery pack (L series)
(p.108).
1Set the mode switch to CHARGE.
2Connect the power cord (mains
lead) to the AC Adaptor/Charger.
3Connect the power cord (mains
lead) to the wall outlet (wall
socket).
4Place the battery pack in the slot
of the AC Adaptor/Charger, press
it down, and slide it in the
direction of the arrow as
illustrated.
The charge lamp turns on and charging
starts.

After charging the battery

The charge lamp turns off (normal charge).
If you continue charging more 1 hour after
the charge lamp turns off, you can use the
battery a little longer (full charge).
Remove the battery pack from the AC
Adaptor/Charger when the charge is
completed.

To attach the battery pack

Press the battery pack against the back of
your camcorder and slide it down.
zTips
• You can check the remaining battery life with
the status check function (p.54).

To remove the battery pack

Slide the POWER switch to OFF. Push the
BATT RELEASE (battery release) button
and remove the battery pack.
Charge lamp
BATT RELEASE
(battery release) button