54
appears during playback of the
movie recorded with [MANU WB
TEMP].
bNotes
• The exposure correction value (EV), shutter
speed, iris and flash on/off will be displayed
during viewing still images.
• When you play back the memory card on other
devices, the camera data may be displayed
incorrectly. Confirm the correct camera data on
your camcorder.
• When GPS triangulation data is displayed,
latitude, longitude, date and time of recording
are displayed in the data code area.
• You can select UTC time or local time for the
date and time display with [GPS TIME
DISPLAY] in the menu.
• If you record without receiving GPS data, [--- --
----] and [--:--:--] will be displayed.
You can check the settings of the following
items.
•Audio setup such as microphone volume
level (p.78)
•Output signa l setup ([VIDEO OUT], etc.)
(p.77)
•Function s assigned to the ASSIGN
buttons (p.47)
•Camera setup (p. 71)
•Record but ton setup (p. 24)
You can check the record button setting.
•Recordi ng media information
You can check the estimated used and free
spaces.
•B attery Info
You can check the remaining capacity of
the attached battery.
1Press the STATUS CHECK button
D.
2Turn the SEL/PUSH EXEC dial C
until a desired display shows up
on the screen.
AUDIO t OUTPUT t ASSIGN t
CAMERA t REC BUTTON SET t
MEDIA INFO t BATTERY INFO
Setup items are displayed according to
the settings of the camcorder when it is
turned on.
To hide the display
Press the STATUS CHECK button D.