Tip

You can use the resume function. Turn off the player by sliding and holding the HOLD/POWER switch towards POWER for more than one second until you see “Good-bye” in the display or by pressing and holding NX on the player with the resume function activated. When you turn on the player for the next time, the player will be in the same status as immediately before being turned off (page 28).

3. Select a track.Search for a track to play.

You can select from “NEWSONGS” (newly stored songs), “ARTIST,” “ALBUM,” “GENRE” and “TRACK” in the Search menu.

1Rotate the jog dial to select the menu item you want.

2Push the jog dial.

The lower menu under the selected menu item appears.

3Repeat steps 1 and 2 to narrow down your selection until you reach the track you want to play.

To go back to the previous menu, press MENU/BACK.

To return to the Search menu

You can return to the initial Search menu by the following procedure:

1Press and hold MENU/BACK for more than one second until the Setup menu appears.

Setup menu

SEARCH

REPEAT

OFF

SHUFFLE

OFF

INTRO SCAN

OFF

2 Select “SEARCH” and push the jog dial.

Tips

•“NEWSONGS” menu contains the tracks that were sent to the player the last time you connected the player to your computer. These tracks will be left in the “NEWSONGS” menu until another new track is sent to the player from your computer.

•Up to 39 alphanumerical characters can be displayed each for artist, album and track names; and up to 19 alphanumerical characters can be displayed for genre, if the track has ID3 TAG information.

14