Notes
•If the size of the current track exceeds the cache capacity, the next track will be stored in the cache instead of the current track.
•In Music Charger mode, you can only play tracks stored in the cache repeatedly; you cannot enter Shuffle play or Intro Scan play mode.
To exit Music Charger modeSelect “M. CHARGER ON” in step 2.
Tips
•When you exit Music Charger mode, settings for the Repeat and Shuffle play modes are maintained, while the Intro Scan play mode is reset to “OFF,” even if it was set to “ON.”
•Music Charger mode will be retained even after you turn off the power. However, if you slide and hold the HOLD/POWER switch towards POWER (press and hold NX on the player) for more than 4 seconds until “Shut down” is displayed, the Music Charger mode will be canceled.
Locking the controls
(HOLD)When carrying the player in a bag, HOLD function can be used to prevent accidental pressing of the buttons.
Slide the HOLD switch in the direction to the arrow.On the remote control, slide the HOLD/ | Basic | |||
POWER switch in the direction to HOLD (to | ||||
the left position). |
|
| operations | |
All operation buttons are disabled. If you | ||||
| ||||
press a button while the HOLD function is |
| |||
on, “ HOLD” appears in the display and |
| |||
the three LED indicators on the player flash |
| |||
three times. |
|
|
| |
Player |
|
|
| |
HOLD | HOLD | The yellow mark |
| |
|
| becomes |
| |
|
| visible. |
| |
HOLD off | HOLD on |
|
|
HOLD | POWER | HOLD | POWER |
HOLD off | HOLD on |
You can set the HOLD function separately for the player and the remote control. For example, you can set the HOLD function on the player to on while the HOLD function on the remote control off, so that you can operate the player only with the remote control.
(Continued)
21