Notes
•You cannot set the alarm if you have not set the clock or there is no message in the selected file (the unit will not enter the alarm setting mode when you press MENU in Step 2 on page 22).
•If you try to set the alarm to play back a message at a previously set time on another message, “PRE SET” will be displayed, preventing new settings.
•If the alarm time comes while another message is being played back with an alarm, the playback stops and the new message will be played back.
•If the alarm time comes during recording, alarm will sound for 10 seconds after the recording is finished and playback begins. “Æ” will flash when the alarm time comes.
•If more than one alarm time comes during recording, only the first message will be played back.
•If the alarm time comes when the unit is in the menu mode, alarm will sound and the menu mode will be cancelled.
•If you erase the message you set the alarm to play back, the alarm setting will be cancelled.
•You can adjust the playback volume with the VOL control.
•If the alarm time comes during erasing, alarm will sound for 10 seconds after the erasing is finished and playback begins.
•Alarm setting will not be cancelled when the alarm playback finishes. To cancel alarm setting, see below.
To cancel the alarm setting or change the alarm time
1Select the message you set the alarm to play back, and press MENU. “ALARM On” will be displayed.
2Press (pPLAY/STOP to flash “On”.3To cancel the alarm setting: Press
To change the alarm date and time: Press (pPLAY/STOP. When the alarm date is displayed, follow the Steps 3 to 5 on pages 23 and 24 to change the alarm date and time.
4Press MENU to exit the menu mode.Operations Advanced