Selecting the Illumination Mode of LCD Back Light

LIGHT OP: The display window is illuminated for 3 seconds after each operation.

LIGHT All: The display window is illuminated at all times during operation.

1 Press MENU to enter the menu mode.

2 Press –=or ++ to display “LIGHT” and press (pPLAY/STOP.

“OP (or All)” will flash.

3 Press –=or ++ to select “OP” or “All” and press (pPLAY/STOP.

Now the setting is completed.

4 Press MENU to exit the menu mode.

When the unit is not being operated (when the display shows the current time), you can illuminate the display window by pressing STOP. This enables you to check the time even in a dark place.

Note

The effect of the illumination may be reduced in a bright location.

32GB