ICD-PX820
4-166-309-11(1)
E:\Voce-P\4166309111\4166309111ICDPX820CE7\01GB-ICDPX820CE7\110TRB.fm
Master: Right
83GB
Troubleshooting
The operation indicator does
not light.
• “LED” is set to “OFF.” Display the menu and set “LED” to “ON”
(page5 7).
“FULL” is displayed and
you cannot start recording.
• The memory is full. Er ase some of the messages (page 20) or
erase all the messages after you store them on your computer.
“FULL” is displayed and
you cannot operate the IC
recorder.
• 99 messages have been recorded in the selec ted folder or 495
messages (when there are 5 folders) in total have been recorded.
Therefore you cannot record another message, or move a message.
Erase some of the messages (page20) or erase all the messages
after you store them on your computer.
Recording is interrupted. • The VOR function is activate d. Set “VOR” to “OFF” in the menu
(page2 4).
Noise is heard. • An object, such as your finger, etc., accidentally rubbed or
scratched the IC recorder during recording so that noise was
recorded.
• The IC recorder was placed near an AC power source, a
fluorescent lamp or a mobile phone during recording or playback.
• Plug of the connected microphone was dirty when recor ding.
Clean the plug.
•The
i (headphones) plug is dirty. Clean the plug.
Recording level is low. “SENS” (microphone sensitivi ty) is set to “ .” Display the
menu and set “SENS” to “ ” (page23).
Symptom Remedy