Adding a Recording (Continued)
1 During playback, press zREC/REC PAUSE briefly.
The “REC” and “ADD” will flash and the unit stops in the recording pause mode.
2 While the “REC” and “ADD” are flashing, press zREC/REC PAUSE.
The “REC” is displayed and “ADD” flashes for 3 seconds on the display window. The OPE indicator will turn red. Then the new recording will be added at the end of the current message.
3 Press xSTOP to stop the recording.
Adding an Overwrite Recording during Playback
You can add an overwrite recording after the selected point in a recorded message. The part of the message after the selected point is deleted.
The starting point of an overwrite recording
| Message 2 |
|
| Message 3 | Message 4 |
|
|
|
|
| The deleted part of | ||
|
|
|
| |||
|
|
|
| Message 2 | ||
|
|
|
|
|
|
|
| Message 2 |
| Message 3 | Message 4 | ||
|
|
|
|
|
|
|
Added overwrite recording in Message 2
1 During playback, press zREC/REC PAUSE briefly.
The “REC” is displayed. “OVER” flashes on the display window and the OPE indicator flashes in red.
2 Press zREC/REC PAUSE to start recording.
The display returns to the display mode set in the menu and the OPE indicator turns red.
3 Press xSTOP to stop the recording.