ICD-SX700/SX800  4-127-580-11(1)
111GB
Troubleshooting
Symptom Remedy
The operation indicator 
does not light.
“LED” is set to “OFF” (page 91). Display the menu and set “LED” 
to “ON.”
“MEMORY FULL” is 
displayed and you cannot 
start recording.
The memory is full. Erase some of the messages (page 71) or 
erase all the messages after you store them on your computer.
“FILE FULL” is displayed 
and you cannot operate 
the IC recorder.
999 messages have been recorded in the selected   folder 
or 1,012 messages (when there are 5 folders) in total have 
been recorded. Therefore you cannot record another message, 
divide a message or move a message. Erase some of the 
messages (page 71) or erase all the messages after you store 
them on your computer.
You cannot add a 
recording or an overwrite 
recording.
As a factory setting, “ADD/OVERWRITE” in the menu is set to 
“OFF.” Display the menu and change “ADD/OVERWRITE” to 
“ADD” or “OVERWRITE” (pages 45, 47).
The remaining memory capacity is insucient. The overwritten 
part will be deleted after the overwriting part nishes 
recording. Therefore, you can only overwrite within the 
remaining recording time.
You cannot add or overwrite a recording with an LPCM, WMA, 
or MP3 le that was not recorded using the IC recorder.
When “ ” is displayed for the folder indicator, you cannot edit 
messages in that folder.
Recording is interrupted. The VOR function (page 42) or the synchronized recording 
function is activated. Set “VOR” to “OFF” (page 84) or “SYNC REC” 
to “OFF” (page 88) in the menu.