ICD-SX700/SX800  4-127-580-11(1)
36GB
OVER indicator
Adjust the maximum
level of the sound to
about –12 dB.
Press and hold  or  to change 
the sound level continuously. The 
sound level is also displayed as a 
number below the level meter.
5 Make other settings for recording
such as “LIMITER, “LCF (LOW CUT),
etc., in the menu.
6 Start recording.
Press  (record/pause).
The operation indicator lights in red 
and “ ” is displayed. 
You do not need to press and hold 
 (record/pause) while recording.
Speak into the built-in microphone.
7 Press (stop) to stop recording.
Tip
The settings you have setfor the manual 
recording mode are saved after therecording 
is finished or the recording levelis switched to 
settingsother than “MANUAL, such as “LOW  .
You can start the manual recoding with the same 
settingsthe next time.
Notes
In the manual recording mode, you cannot 
record with the VOR function (page 42). 
In the manual recording mode, you cannot 
review the current recording, even if you 
press .