ICD-SX700/SX800  4-127-580-11(1)
52GB
8 Press (record/pause) to start
recording.
“   ” ashes and the IC recorder 
enters the recording pause mode.
9 Start playback on the component
connected to the IC recorder.
“   ” appears on the display and 
synchronized recording starts.
The synchronized recording pauses 
when no sound is detected for more 
than 2 seconds, and “   ” ashes.
The IC recorder starts recording again as 
a new message when sound is detected.
Notes
During synchronized recording, you cannot 
divide a recording message (page 43), you 
cannot pause recording (page 29), you 
cannot record with the VOR function or 
you cannot record with the pre-recording 
function.
Depending on the equipment connected to 
the IC recorder, the synchronized recording 
function may not operate properly due to a 
difference in the audio input level.

To record without using

the synchronized recording

function

1 Press and hold /MENU to enter
the menu mode.
The menu mode window will be 
displayed.
2 Press or to select “DETAIL
MENU,” then press .
3 Press or to select “SYNC
REC,” then press .
4 Press or to select “OFF,”
then press .