ModelName: ICD-UX522/UX522F/UX523/UX523F
PartNumber: 4-293-033-12
126
126
Troubleshooting
Table of
Contents
Index
Clock
“--:--” is displayed.
You have not set the clock ( p. 23).
“--y--m--d” or “--:--” is displayed on the REC Date display.
The date of recording will not be displayed if you recorded the file when the clock
was not set.
Display
There are fewer menu items displayed in the menu mode.
During playback, recording, or FM reception (ICD-UX522F/UX523F only) modes,
there are menu items that are not displayed ( p. 79).
The remaining time displayed in the display window is shorter than that
displayed in the supplied Sound Organizer software.
The IC recorder requires a certain amount of memory for system operation. That
amount is subtracted from the remaining time, which is the reason for the
difference.
Files
The “Memory Full” animation is displayed and you cannot start recording.
The memory is full.
Erase some of the files ( p. 57) or erase all the files after you store them on the
other memory media or on your computer.
The “File Full” animation is displayed and you cannot operate the IC recorder.
199 files have been recorded in the selected folder ( ) or 4,074 files (when there
are 21 folders) in total have been recorded. Therefore you cannot record another
file, or move a file.
Erase some of the files ( p. 57) or erase all the files after you store them on the
other memory media or on your computer.
The memory card is not recognized.
Remove a memory card and check the side of the memory card. Then insert it with
correct side and direction ( p. 20).
Switch the memory media of the IC recorder to “Memory Card” ( p. 29).
Continued