41
41
Recording Files
Table of
Contents
Index
ModelName: ICD-UX522/UX522F/UX523/UX523F
PartNumber: 4-293-033-11
Connect other equipment to the IC recorder when the IC recorder is
in the stop mode.
Connect the audio output connector (stereo mini-plug) of other
equipment to the jack of the IC recorder using an audio connecting
cable.
“Select Input” appears in the display window.
If “Select Input” is not displayed, set it in the menu ( p. 83).
Press or to select “Audio IN,” and then press /ENTER.
Press REC/PAUSE to start recording.
“” flashes and the IC recorder enters the recording pause mode.
Start playback on the piece of equipment connected to the IC
recorder.
“ ” appears on the display and synchronized recording starts.
When no sound is detected for more than 2 seconds, “Dividing...” appears and
then “ ” begins to flash. The synchronized recording pauses.
The IC recorder starts recording again as a new file when sound is detected.

To record without using the synchronized recording function

Select “OFF” in step of “To record using the synchronized recording
function” ( p. 40), and then proceed with steps through . When you
press REC/PAUSE in step , the built-in microphones are automatically cut
off and the sound from the connected piece of equipment is recorded.