Disconnecting the IC recorder from your computerFollow the procedures below; otherwise, data may be damaged.1 Make sure that the operation indicator is not flashing.2 Disconnect the IC recorder from the USB connector of the computer.

On the Windows screen, left-click “Safely Remove Hardware” on the taskbar, and click “Safely remove USB Mass Storage Device.”

On the Macintosh screen, drag the “IC RECORDER” on the desktop to “Trash” and drop it there.

For details on disconnecting the IC recorder, refer to the operating instructions supplied with your computer.

Step 2: Setting the Clock

,

/MENU ENT

You need to set the clock to use the alarm function or record the date and time.

Clock setting display appears when you insert battery for the first time, or when you insert a battery after the IC recorder has been without battery for more than

3minutes, “SET DATE & TIME” appears, and then the year section flashes in the display window.

GB