FM wire
antenna There is a tactile dot beside volume to showthe direction to turn up the volume.AC power cordThe CD u button has a tactile dot.About CD-Rs/CD-RWs
This unit is compatible with
Music discs encoded with copyright protection technologies
This product is designed to play back discs that conform to the Compact Disc (CD) standard. Recently, various music discs encoded with copyright protection technologies are marketed by some record companies. Please be aware that among those discs, there are some that do not conform to the CD standard and may not be playable by this product.
To handle compact discsCorrectHandle the disc by its edge.IncorrectDo not touch the surface.Do not stick paper or tape or write anything on the surface.Notes•Discs with
•If you press CD u when there is no disc in the CD compartment, “00” flashes for about 5 seconds on the display and the unit turns off automatically.
•After 20 minutes, playback will be stop when you press CD u during play back.Various Modes of CD
Playback
You can play tracks repeatedly or in random order.Press CD PLAY MODE.Each press changes the play mode as follows:| Display | Play |
| Indication | mode |
| none | (normal play) |
All the tracks are played once. |
|
m |
|
| “REP 1” | (single repeat) |
Improving the
Reception
TV/WEATHER/FM:Extend the FM wire antenna fully to increase reception sensitivity.AM: Rotate the unit horizontally for optimum reception. A ferrite bar antenna is built into the unit.
Do not operate the unit over a steel desk or metal surface, as this may lead to interference of reception.
Presetting Your Favorite Station
—Preset Tuning
You can preset up to 10 stations in FM (5 stations in FM1, 5 stations in FM2), and 5 stations each in AM,
TV, WEATHER.Presetting a Station
1Follow steps 1 to 4 in “Playing the Radio” and manually tune into the station you wish to preset.
2Hold down the PRESET TUNING button you wish to preset until you hear two short beeps.
Example: Displaywindow when you preset FM 90 MHz in the PRESET TUNING 2 button for FM2.The frequency remains on the display for about 10 seconds and then returns to the previous display.
To preset another station, repeat these steps.To change the preset station, tune into the desired station and hold down the PRESET TUNING 1 to 5 button. The new station will replace the previous station on the PRESET TUNING button.
Tuning into a Preset Station
1 | Press RADIO•BAND to turn on the radio. |
2 | Press RADIO•BAND to select the band. |
3 | Press the desired PRESET TUNING |
| button. |
4 | Adjust the volume using VOLUME. |
| After about 10 seconds, the display will return to |
| the previous display but the PRESET TUNING |
| button number will remain. |
|
| P- |
| AM P1 to 5 |
|
| FM1 P1 to 5 |
|
| |||
| WEATHER |
| TV P1 to 5 |
| FM2 P1 to 5 |
| ||||||
|
| P1 to 5 |
|
|
|
|
|
|
|
|
| |
You can directly select the desired
To Set the Buzzer Alarm:
1Press ALARM SET BUZZER for a few seconds.“ALARM” and “BUZZER” appear on the display. After one beep, “ALARM” and the hour will start to flash on the display.
2Press TUNE/TIME SET + or – until the desired hour appears.To set the hour rapidly, hold down TUNE/TIME SET + or
The minute will flash.
4Repeat step 2 to set the minute and pressALARM SET BUZZER.Two short beeps will confirm the setting.
To Set the Alarm Mode
Before setting the alarm mode, be sure to set the alarm time. (See “To Set the Alarm Time”.)
Repeat the pressing of ALARM MODE to select the alarm mode you want. Every time you press ALARM MODE, CD/RADIO/BUZZER indicator changes in the order as follows:
CD
ALARM OFF—
The CD, radio, or buzzer alarm is turned off automatically after 60 minutes.To Stop the Alarm
Press OFF x•ALARM RESET to turn off the alarm. The alarm will come on again at the same time the next day.
To Deactive the Alarm
Press ALARM MODE repeatedly until CD/RADIO/ BUZZER indicator go off.Using the NAP Timer (Count Down Timer)
The NAP timer sounds the buzzer after a preset time duration.Press NAP repeatedly until the desired minutes are displayed.Every press changes the display as follows:OFF| (current time) |
| 10 |
| 20 |
| 30 |
|
|
|
120
90 
60 
” and the NAP time is displayed for a few seconds.NAP timer starts counting down the NAP time.When the selected NAP time has passed, a beepsounds, and “ 
” appears in the display.To Stop NAP Timer
Press NAP or OFF x•ALARM RESET to turn off the buzzer.To Deactive NAP Timer
Press NAP.“
” goes off in the display.Setting the Sleep Timer
You can fall asleep to the CD or the radio using the
You can set the sleep timer to durations of 90, 60, 30, or 15 minutes. Every push changes the display as follows:
off (current time)
90 
6015 
30 
Setting the Brightness of the Backlight
Press BRIGHTNESS to select high, middle or low for the display according to your preference.
Setting the Clock and Date
1Plug in the clock radio.The display will flash “AM 12:00”.2Press CLOCK for a few seconds.You will hear a beep and the year will start to flash in the display.3Press TUNE/TIME SET + or – until the correct year appears in the display.4Press CLOCK once.5Repeat steps 3 and 4 to set the month, day, hour, and minute.After setting the minutes, press CLOCK to start the clock, and you will hear two short beeps.
To display the year and date, press SNOOZE•DATE/SLEEP OFF once for the date, and within 4 seconds press it again for the year. The display shows the date or year for a few seconds and then changes back to the current time.
To set the current time rapidly, hold down TUNE/TIME SET + orIn step 5, when you press CLOCK after the minute setting to activate the clock, the seconds start counting from zero.
To change the display to thedaylight saving time (summer time) indicationPress D.S.T./SUMMER T.“” is displayed and the time indication changes to summer time.To deactivate the summer time function, pressD.S.T./SUMMER T. again.Playing a CD
An 8 cm“NCD” and “TRACK 01” appear on the display to indicate that track 1 of the CD is playing.
4Press VOLUME to adjust the volume.To | Press |
| Pause | CD u |
|
|
| Resume play after pause | CD u again |
|
|
| Locate the beginning of | .** |
| the current track (AMS*) |
|
|
|
| Locate the next track | >** |
| (AMS*) |
|
|
|
| Go back at high speed | Hold down .** |
| Go forward at high speed | Hold down >** |
| Locate the previous track | . repeatedly** |
(AMS*) |
|
|
|
| Locate the succeeding | > repeatedly** |
| track (AMS*) |
|
| Stop play | x |
| A single track is played repeatedly. | |
m |
|
| “REP ALL” | (all repeat) |
| All the tracks are played repeatedly. | |
m |
|
| “SHUFFLE” | (shuffle play) |
| All the tracks are played once |
|
| in random order. |
|
m |
|
| “SHUFFLE REP” | (shuffle repeat) |
Playing the Radio
—Manual Tuning
1Press RADIO•BAND to turn on the radio.“RADIO” appears on the display.2Press RADIO•BAND repeatedly to select the desired band.Each press changes the band as follows:AM FM1 FM2WEATHER TVWhen using FM1 or FM2 preset mode, you may listen to the radio on either mode (See “Presetting Your Favorite Station”).
3Use TUNE/TIME SET + or – to tune into a station.Two short beeps sound when the minimum frequency of each band is received during tuning.
4Adjust volume using VOLUME.When you release TUNE/TIME SET + or – after locating your desired station, the display returns to the previous display after about 10 seconds.
To check the frequency of the
Holding down the desired PRESET TUNING button for more than a few seconds in step 3 will replace the previous station on the PRESET TUNING button with the station you are tuned into.
Setting the Alarm
This clock radio is equipped with 3 alarm modes— CD, radio and buzzer. Before setting the alarm, make sure to set the clock (see “Setting the Clock and Date”).
To Set the Alarm Time
To Set the CD Alarm:
For the CD alarm, the track you specified as the(If the CD play mode is set to “SHUFFLE” or “SHUFFLE REP”, however, all the tracks are played in random order.)
1With the alarm turned on, adjust the volume to the level you require.2Press ALARM SET CD for a few seconds.“ALARM”, “CD” appear on the display.After one beep, “ALARM” and the hour will start to flash in the display.3Press TUNE/TIME SET + or – until the desired hour appears.
To set the hour rapidly, hold down TUNE/TIME SET + or
The minute will flash.
5Repeat step 3 to set the minute and press
ALARM SET CD.TheTwo short beeps will confirm the setting.
To Set the Radio Alarm:
For the radio alarm, the station you specified as the“ALARM” and “RADIO” appear on the display. After one beep, “ALARM” and the hour will start to flash on the display.
To Check the Alarm Setting
For ALARM SET CD, pressing once displays the alarm time, pressing twice displays the
For ALARM SET RADIO, pressing once displays the alarm time, pressing twice displays the
The display shows the alarm setting for a few seconds and then returns to the previous display.
Alarm time in CD alarm, radio alarm and buzzer alarm is set at AM 12:00 when you purchased the unit.
ALARM ON—
If you set the CD alarm and there is no disc in the CD player, the buzzer alarm will sound in its place at the time set.
For the buzzer alarm, the beeping of the alarm becomes more rapid after every few seconds in three progressive stages.
Note
When CD, radio and buzzer alarms are set for the same time, the CD alarm takes precedence. If the CD alarm is not set, the radio alarm takes precedence.
To Doze for a Few More Minutes
Press SNOOZE•DATE/SLEEP OFF.The CD, radio or buzzer alarm turns off but will be automatically activated again after about 10 minutes. Every time you press SNOOZE•DATE/SLEEP OFF, the snooze time changes as follows:
10 
20 
30
40 
50 
60
The display shows the snooze time for a few seconds and returns to show the current time. When you press SNOOZE•DATE/SLEEP OFF after the current time appears, the snooze time starts from 10 minutes again.
The maximum length of the snooze time is 60 minutes.To turn off the CD or the radio before the preset time, press SNOOZE•DATE/SLEEP OFF.