Jack

Description

4 VIDEO 6 IN

HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-digital

HDMI IN/R-AUDIO-Laudio/video interface between this TV and any HDMI-equipped audio/video component,

 

such as a set-top box, DVD player, and A/V receiver. HDMI supports enhanced, or high-

 

definition video, plus two-channel digital audio.

 

 

5 VIDEO 1/3 IN

Connect to the composite A/V output jacks on your VCR or other video component. A third

VIDEO/

composite A/V input jack (VIDEO 2) is located on the left side panel of the TV. These

R-AUDIO-L (MONO)

video connections provide better picture quality than the VHF/UHF (8) connections.

6HD/DVD 4/5 IN Connect to your DVD player’s or digital set-top box’s component video (Y, PB, PR) and (1080i/720p/480p/ audio (L/R) jacks. Component video provides better picture quality than the S VIDEO (9),

480i)

the VHF/UHF (8) or the composite video (5) connections.

 

 

7 CABLE

RF input that connects to your cable signal.

 

 

8 VHF/UHF

RF input that connects to your VHF/UHF antenna or cable box.

 

 

9 VIDEO 1/3 IN

Connects to the S VIDEO OUT jack of your VCR or other video equipment that has

S VIDEO

S VIDEO. S VIDEO provides better picture quality than either composite video (5) or

 

VHF/UHF (8) connections.

0CENTER SPEAKER Connect the center output terminals of Dolby Pro Logic* system decoder amplifier. You can IN 180W (6Ω) MAX use the TV speakers as a center speaker.

qa CONTROL S

Allows the TV to receive (IN) and send (OUT) remote control signals to other Sony

IN/OUT

infrared-controlled audio or video equipment that has the CONTROL S function.

qs SUBWOOFER OUT Connects to the input jack of your woofer. (VAR)

qd AUDIO OUT

Connects to the left and right audio input jacks of your audio or video equipment. You can

(VAR/FIX/R/L)

use these outputs to listen to your TV’s audio through your stereo system.

 

 

*“Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories.

Setup

19