Programming the Remote Control

5

The remote control is preset to operate Sony brand video equipment.

Sony Equipment

Programmable Code Number

 

 

Remote Control

DVD/ SAT/ POWER

MUTING VCR CABLE

MODETV/ PICTURE WIDE DISPLAY VIDEO

GUIDE FAVORITES MENU

TOP MENU

POWER

SOUND

/TV/SAT

ANT

SAVING

MODE

 

 

 

GUIDE

RESET

 

MTS/SAP

JUMP

DVD/VCR

601

(Sony Dream System)

SAT/Cable

801

(Sony Satellite Receiver)

 

 

 

If you have video equipment other than Sony brand that you want to control with the TV’s remote control, use the following procedures to program the remote control.

3

The equipment must have infrared (IR) remote capability in order to be used with this remote control.

4

From the “Manufacturer’s Codes” listed on page 59, select the three-digit code number for the manufacturer’s code of your equipment. If more than one code number is listed, try entering them one by one until you come to the correct code for your equipment. Use the code number to complete the following procedure.

1Press the DVD/VCR (FUNCTION) and RESET buttons simultaneously, or press the SAT/CABLE (FUNCTION) and RESET buttons simultaneously. DVD/VCR and SAT/CABLE buttons flash.

1, 2

2Press the function button you want to program.

To program a cable box or a satellite receiver Press SAT/CABLE (FUNCTION).To program video equipment Press DVD/VCR (FUNCTION).

3Enter the three-digit manufacturer’s code number using the 0-9buttons.

4Press ENT.

1

5 To check if the code number works, aim the TV’s remote control at the equipment and press DVD/VCR and/or SAT/CABLE (POWER) that corresponds with that equipment. If it responds, the programming is completed. If not, try using the other codes listed for that manufacturer.

If you enter a new code number, the code number you previously entered at that setting is erased.

In some rare cases, you may not be able to operate your equipment with the Sony remote control. In this case, use the equipment’s own remote control unit.

58