Satellite Receiver and VCR

Setup

To connect a satellite receiver and VCR

1Connect the CATV cable to the single (input) jack of the splitter.

2Use the 75-ohm coaxial cable to connect one of the splitter’s two output jacks to the TV’s CABLE jack.

3Use the 75-ohm coaxial cable to connect the splitter’s other output jack to the satellite receiver’s VHF/UHF input jack.

4Connect the satellite antenna cable to the satellite receiver’s satellite input jack.

5Use the 75-ohm coaxial cable to connect the satellite receiver’s VHF/UHF output jack to the VCR’s VHF/UHF input jack.

6Use an A/V cable to connect the satellite receiver’s A/V output jacks to the TV’s A/V input jacks (VIDEO 1 or 3).

7Use an A/V cable to connect the VCR’s A/V output jacks to the TV’s A/V input jacks (VIDEO 1 or 3).

8Run Auto Program, as described in “Setting Up the Channel List” on page 53.

Using S VIDEO jacks? See page 29.

38