Troubleshooting
If you have additional questions, service needs, or technical assistance related to the use of your Sony TV, please visit our website or call one of the following numbers:
http://www.sony.com/TVsupport
Remote Control
Problem | Possible Remedies |
Remote control does not | ❏ The batteries could be weak. Replace the batteries. |
operate | ❏ Check the orientation of the batteries. |
| ❏ Press TV (FUNCTION) once, and the TV indicator lights up. You may have |
| inadvertently pressed SAT/CABLE (FUNCTION), which changes the remote |
| control to SAT or CABLE mode. |
| ❏ Make sure this unit’s power cord is connected securely to the wall outlet. |
| ❏ Florescent lamps can interfere with your remote control operation; try turning off |
| the florescent lamps. |
| ❏ Keep the remote control sensor area clear from obstacles. |
| ❏ If the "High Temperature Warning" message appears, turn off the TV and wait |
| until the TV's projection lamp cools down (approximately 5 minutes). If the |
| remote control still does not work, make sure to dust the ventilation slots on the |
| rear of the TV and the cooling fan to provide adequate ventilation around the TV. |
|
|
Cannot change channels with | ❏ If you are using the TV to change channels, first press TV (FUNCTION) once, |
the remote control | and the TV indicator lights up. |
| ❏ If you are using another device to change channels, be sure you have not |
| inadvertently switched your TV from the channel 3 or 4 setting. |
| ❏ If you are using another device to change channels, be sure to press FUNCTION |
| for that device. For example, if you are using your cable box to change channels, |
| be sure to press SAT/CABLE (FUNCTION) once, and the SAT/CABLE indicator |
| lights up. |
Remote control does not operate
❏If you replaced the batteries to the remote recently, the code numbers for the video equipment may need to be reset.
❏There may be more than one code for the equipment that you are attempting to operate.
❏There is a possibility that some
80