Cable System or VHF/UHF Antenna System
Cable Box
For best results, use this connection if you:
❑Have a cable or an antenna.
❑Do not have a cable box or VCR. (If you have a cable box, see below. If you have a VCR, see pages 29 and 30.)
Rear of TV
✍Do not use an indoor antenna, which is especially susceptible to radio noise.
For best results, use this connection if:
❑Your cable company scrambles all channels, which requires you to use a cable box.
❑You do not have a VCR. (If you have a VCR, see pages 29 and 30.)
To connect the cable box
1 Connect the CATV cable to the cable box’s input jack.
2 Use a coaxial cable to connect the cable box’s output jack to the TV’s CABLE input.
3 Turn on the cable box first, then run Auto Program as described in “Setting Up the Channel List” on pages 27.
CATV cable | Coaxial cable | VHF/UHF |
|
| Rear of TV |
TV the Connecting
IN |
|
|
|
| OUT |
|
|
|
| ||
|
|
|
| ||
|
|
|
|
| |
|
| Cable box | |||
Notes on Using This Connection |
|
|
| ||
|
| ||||
To do this... | Do This ... | ||||
Use the cable box | Tune the TV to the channel the cable box is set to (usually channel 3 | ||||
|
|
| or 4) and then use the cable box to switch channels. | ||
|
| ||||
Set up the TV remote control to operate the cable | Program the remote control. See “Programming the Remote | ||||
box | |||||
|
| ||||
Activate the remote control to operate the cable | Press SAT/CABLE (FUNCTION) once, and the SAT/CABLE | ||||
box | indicator lights up. | ||||
|
| ||||
Prevent the accidental switching of TV channels | When using the cable box, ensure that the TV remains tuned to the | ||||
|
|
| channel that the cable box is set to (usually channel 3 or 4). | ||
|
|
|
|
|
|
23