Setting Up the Channel List
After you finish connecting the TV, you can run the Initial Setup to create a list of available analog and digital channels. The Initial Setup screen appears when you turn on the TV for the first time after hooking it up. If you choose to set up the channels at a later time, select the Auto Program option to scan available channels (see page 66).
✍The Auto Program setup in the initial setup does not apply for installations that use a cable box for all channel selection.
Using Initial Setup To run Initial Setup the first time you turn on your TV
1 Press | TV POWER |
to turn on the TV. |
The Initial Setup screen appears.
2 Press V or v to highlight the
display language. Then press 
. The message “First please connect cable and/or antenna” appears. This may require 50+
minutes for completion and “Start auto program now?” appears.
3 Press V or v to highlight “Yes” then press 
.
Auto Program performed through Initial Setup will automatically create a list of receivable channels from both VHF/UHF antenna and cable TV channels if both sources are connected.
✍Auto Program may take a while (20 to 50 minutes) to complete. A progress bar is displayed while available channels are being scanned. If you cancel the Auto Program before all receivable channels are scanned, you may want to perform the task later (see “To run Auto Program at a later time” below).
✍If you selected “No” during the Initial Setup, the Initial Setup message will appear each time you turn on the TV as a reminder until you complete the Auto Program.
To run Auto Program at a later time
1 Select Settings in MENU, and then go to Channel settings. 2 Select Auto Program then select Start.
✍Auto Program will create a list of receivable channels for the current input (VHF/UHF antenna or CABLE). You will be required to run Auto Program for each RF input to create a list of available channels from both inputs.
TV the Connecting
27