4.Setting Up the Channel List

– Initial Setup

The Initial Setup screen appears when you turn on the TV for the first time.

Initial Setup

Step 1 of 5

 

 

Please select a language. Language settings will apply to

on screen display as well as default audio for digital channels. Highlight a choice and press to continue.

English

Español

Français

~

•If you accidentally turn off the TV during the Initial Setup process, the Initial Setup will restart from the beginning when the TV is turned back on.

•The Auto Program may be canceled while the channels are being scanned. Press RETURN first, then press either B/b on the remote control, highlight “Yes” to cancel or “No” to resume the Auto Program.

sTo Run Initial Setup Again or AutoProgram Again at a Later Time

Select the Initial Setup feature from the XMB™ (XrossMediaBar) or refer to the Initial Setup described on page 42. To run Auto Program, see page 37.

After you finish connecting the TV, you can run Initial Setup to create a list of available analog and digital channels if you have connected an antenna or cable directly to the TV’s VHF/UHF/ CABLE input.

You will be prompted to select the language of your choice to be used for all the on screen settings.

Use the remote control to navigate through the Initial Setup:

V/v button:

Allows you to highlight options where applicable.

button:

Allows you to select the highlighted option and advance to the next screen.

B button:

Allows you to move back to the previous screen.

bbutton:

Allows you to move to the next screen.

Follow the help text provided on the screen to run Auto Program with the connected signal source or select Skip to skip the Auto Program if you are receiving channels from a cable box or satellite receiver and the VHF/UHF/CABLE input is not connected. The Auto Program will scan for available channels. When the Auto Program is completed, the TV will display how many analog and digital channels are found.

sTo Add Digital Channels

Use the Add Digital Channels feature as described on page 38. (Useful for antenna installations.)

sTo Display the Picture in Your PreferredAspect Ratio

Select the proper Wide Mode as described on pages 23 and 35.

You may want to set up convenient features such as Favorites (see page 21), Show/Hide Channels (page 38), Edit Channel Labels (page 38) when Auto Program is completed.

18