Remote Control

Inserting Batteries into the Remote Control

Insert two size AA batteries (supplied) by matching e and E on

 

the batteries to the diagram inside the battery compartment of the

,

remote control.

 

~

•To avoid possible damage from battery leakage, remove the batteries if you anticipate the remote control will not be used for an extended period.

•Handle the remote control with care. Avoid dropping it, getting it wet, or placing it in direct sunlight, near a heater, or in high humidity.

Button Descriptions

1

2

3

4

5

Button Description

1DISPLAY Press once to display the information pertaining to the channel and/or program when available. The OSD (On Screen Display) will time out in a few seconds or press again to immediately turn off the display. You can also set the display to show minimal information. See Info Banner on page 42.

2SLEEP Press repeatedly until the TV displays the time in minutes

(Off, 15min, 30min, 45min, 60min, 90min or 120min) that you want the TV to remain on before shutting off. To cancel Sleep Timer, press SLEEP repeatedly until Off appears.

3FUNCTION The FUNCTION button indicator lights up momentarily

Buttons when pressed to show which external equipment the remote control is operating. When the remote control is set to operate the external equipment, these buttons will operate the equipment you choose. You must first press one of these FUNCTION buttons to operate the corresponding equipment. See page 25 for “Programming the Remote Control”.

40-9 ENT Press 0-9to select a channel; the channel changes after two seconds. Press ENT to change channels immediately.

5

Use with 0-9and ENT to select digital channels.

 

For example, to enter 2.1, press 2 , , 1 and ENT.

~

•The 5, PLAY and CH + buttons have a tactile dot. Use them as a reference when operating the TV.

20