Programming the Remote Control

2

3

2

4

Operating Sony Brand Video

Equipment

The remote control is preset as below so that you may not need to program the remote control.

Sony Equipment

Programmable Code Number

BD

101

(Sony Blu-ray Disc Player)

 

 

 

DVD

751

(Sony DVD Player)

 

 

 

STB

801

(Sony Satellite Receiver)

 

 

 

Programming Non-Sony Video Equipment

Follow the steps below to program your TV’s remote control.

1In the space provided below, write down the three-digit code of your equipment found on the Manufacturer’s Codes List on page 26.

If more than one code is listed, try entering the code listed first.

Code No.

2Press and hold , or and simultaneously to light the FUNCTION

button.

3Enter the three-digit code using - while the selected button is lit. If the code is not

entered within 10 seconds, you must repeat step 2.

4Press while the FUNCTION button is lit. If programmed correctly the selected FUNCTION button blinks twice. If not it blinks five times.

To Confirm the Programming

If you can turn on and off the equipment by pressing the green POWER button, then the programming is complete. If not, try the next code listed.

~

•In some cases, you may not be able to program your remote control. If this is the case, use your equipment’s own remote control.

•Any one of the FUNCTION buttons can be programmed to operate other equipment regardless of the labeling. For example, if programmed with the

correct code, can operate DVD/VCR combo equipment. This is useful if your equipment does not match the labeled buttons available. Make note of your equipment’s programmed button.

•You may program one equipment per FUNCTION button.

Started Getting

25