Watching the TV
Programming the Remote Control
The remote control is preset to operate Sony brand video equipment.
Sony Equipment | Programmable Code Number |
DVR | 772 |
|
|
DVD/VCR | 601 (Sony Dream System) |
|
|
SAT/Cable | 801 (Sony Satellite Receiver) |
|
|
MUTING TV/VIDEO POWER TV POWER
DVD/ SAT/
DVR VCR CABLE TV
|
|
| ENT |
JUMP | ANT | MTS/SAP | FREEZE |
SOUND | PICTURE | TV/SAT | WIDE |
|
| SUR |
|
|
| D |
|
| UIDE | I |
|
| SP | ||
G |
|
| LAY |
RETURN |
| TOOLS | |
|
| WEGA GATE |
|
PREV REPLAY ADVANCE | NEXT | ||
|
| PLAY |
|
VISUALSEARCH | PAUSE | STOP |
VOL CH
REC | REC PAUSE | REC STOP | |
TOP MENU MENU | F1 | F2 | |
POWER SAVING |
|
|
|
Follow the steps below to program your TV’s remote control to operate the
1other video equipment.
Find the
Codes” listed on page 45. If more than one code number is listed, try
2entering from the code listed first.
3
1 Press and hold the DVR , or FUNCTION button you want to
| program on the remote control and press the button simultaneously. | |
1 | The selected FUNCTION button (DVR, DVD/VCR or SAT/CABLE) | |
will flash. | ||
|
2 Enter the
3 Press button.
When programmed correctly, the selected FUNCTION button will flash twice, and when not, it flashes five times.
To check if the code works
Aim your TV’s remote control at the equipment, and press the green POWER button. If the equipment turns on and off, the programming is completed. If not, try the next code listed.
✍If no code is input within the above specified time, or an invalid or incorrect code number is input, the remote control automatically goes back to the previous setting.
✍In some cases, you may not be able to program your remote control to operate other equipment. In such cases, use the equipment’s own remote control.
✍Removing the batteries or using dead batteries may cause the programmed codes to be lost and revert back to the factory setting. Reprogramming the codes may be necessary.
TV
44