Other Information
Audio
Problem | Possible Remedies |
Good picture, no sound | ❏ Press MUTING so that Muting disappears from the screen (see page 42). |
| ❏ Make sure the Speaker option is set to On in the Audio menu (see page 61). |
| ❏ Make sure the MTS option is set to Stereo or Mono (see page 61). |
|
|
Audio noise | ❏ Communication problems may occur if infrared communication equipment (e.g., |
| infrared cordless headphones) is used near the TV. Please use headphones other |
| than infrared cordless headphones. Also, if you use infrared communication |
| equipment other than infrared cordless headphones, move the infrared transceiver |
| away from the TV until the noise is eliminated, or move the transmitter and |
| receiver of the infrared communication equipment closer together. |
|
|
Cannot gain enough volume | ❏ Increase the volume of the cable box using the cable box’s remote control. Then |
when using a cable box | press FUNCTION once, and the TV indicator lights up and adjust the TV’s |
| volume. |
|
|
Sound seems weak or | ❏ The TV’s audio might be set to Auto SAP or Mono, when it might be better set to |
insufficient | Stereo. In the Audio menu (see page 61), set the MTS setting to Stereo. If |
| already set to Stereo, switch to Mono (which may reduce background noise |
| during weak stereo broadcasts). |
Cannot raise the volume on external speakers
❏If the Speaker option is set to Off and the Audio Out option is set to Fixed (in order to output the sound to your audio system) use your audio receiver to adjust the sound (see page 61). Or, to use the TV remote control, set the Audio Out option to Variable.
❏To turn on the TV speakers, set the Speaker option to On (see page 61).
Channels
Problem | Possible Remedies | |
Cannot receive upper channels | ❏ | Press ANT to select the VHF/UHF input (see page 42). |
(UHF) when using an antenna | ❏ | Use Auto Program in the Channel menu to add receivable channels that are not |
|
| presently in the TV’s memory (see page 64). |
|
|
|
Cannot receive any channels | ❏ | Use Auto Program in the Channel menu to add receivable channels that are not |
when using cable TV |
| presently in the TV’s memory (see page 64). |
| ❏ | Press ANT to select the CABLE input (see page 42). |
|
|
|
Cannot receive or select | ❏ | Use Auto Program in the Channel menu to add receivable TV channels that are |
channels |
| not presently in TV memory (see page 64). |
|
|
|
Some digital cable channels are | ❏ | Certain cable companies have limitations on the broadcast of digital cable |
not being displayed |
| channels. Check with your cable company for more information. |
| ❏ | The digital cable channel may be set to Hidden in the Channel settings menu (see |
|
| |
|
|
|
82