Sound
Problem | Cause/Remedy | |
|
|
|
No sound, but good picture | • | Press 2 +/– or % (Mute). |
|
|
|
Noisy sound | • | See the “Picture noise” causes/remedies on page 33. |
|
|
|
Channels
Problem | Cause/Remedy |
|
|
The desired channel cannot be | • Switch between digital and analogue mode and select the desired digital/ |
selected | analogue channel. |
Some channels are blank • Scrambled/Subscription only channel. Subscribe to the Pay Per View service.
•Channel is used only for data (no picture or sound).
•Contact the broadcaster for transmission details.
Digital channel is not displayed • Check that the aerial is plugged directly into the TV (not through other equipment).
•Contact a local installer to find out if digital transmissions are provided in your area.
•Upgrade to a higher gain aerial.
General
ProblemCause/Remedy
The TV turns off automatically (the TV enters standby mode)
•Check if the “Sleep Timer” is activated, or confirm the setting of “Off Time” (page 23).
•If no signal is received and no operation is performed in the TV mode for 10 minutes, the TV automatically switches to standby mode.
The TV turns on automatically | • Check if the “On Time” is activated (page 23). | |
|
|
|
Some input sources cannot be | • | Select “AV Preset” in the |
selected |
| source (page 24). |
|
|
|
The remote does not function | • | Replace the batteries. |
|
|
|