Set-up menu
| Set Up |
|
|
|
|
|
|
| Auto Start Up |
|
|
|
|
|
|
| Language | English |
|
|
|
|
|
| Country | - |
|
Auto Tuning
Programme Sorting
AV Preset
Sound Offset
Manual Programme Preset
Digital Set Up
Back: | Select: | Enter: | Exit: MENU |
|
|
|
|
You can select the options listed below on the
Auto Start-up
Starts the “first time operation menu” to select the language and country/region, and tune in all available digital and analogue channels. Usually, you do not need to do this operation because the language and country/region will have been selected and channels already tuned when the TV was first installed (page 5, 6). However, this option allows you to repeat the process (e.g., to retune the TV after moving house, or to search for new channels that have been launched by broadcasters).
Language | Selects the language in which the menus are displayed. |
|
|
Country | Selects the country/region where you operate the TV. |
| Tip |
| The country/region in which you want to use the TV does not appear in the list, select |
|
Auto Tuning
Tunes in all the available analogue channels.
Usually you do not need to do this operation because the channels are already tuned when the TV was first installed (page 5, 6). However, this option allows you to repeat the process (e.g., to retune the TV after moving house, or to search for new channels that have been launched by broadcasters).
Programme Sorting | Changes the order in which the analogue channels are stored on the TV. | |
| 1 | Press F/f to select the channel you want to move to a new position, |
|
| then press g. |
| 2 | Press F/f to select the new position for your channel, then press . |
|
| |
AV Preset | Assigns a name to any equipment connected to the side and rear sockets. The name | |
| will be displayed briefly on the screen when the equipment is selected. You can skip | |
| an input source that is not connected to any equipment. | |
| 1 | Press F/f to select the desired input source, then press . |
| 2 | Press F/f to select the desired option below, then press . |
|
| • AV1 (or AV2/AV3/AV4/PC), VIDEO, DVD, CABLE, GAME, CAM, SAT: Uses one |
|
| of the preset labels to assign a name to connected equipment. |
|
| • “Edit”: Creates your own label. |
|
| • “Skip”: Skips an input source that is not connected to any equipment when you |
|
| press F/f to select the input source. |
|
| |
Sound Offset | Sets an independent volume level to each equipment connected to the TV. | |
|
|
|