Sound Offset | Sets an independent volume level to each equipment connected to the TV. | |
|
| |
Manual Programme | Before selecting “Label”/“AFT”/“Audio Filter”/“Skip”/“Decoder”, press F/f to | |
Preset | select the programme number you want to modify. Then, press . | |
System | ||
|
Presets programme channels manually.
1Press F/f to select “System”, then press 
.
2Press F/f to select one of the following TV broadcast systems, then press G.
B/G: For western European countries/regions
D/K: For eastern European countries/regions
L: For France
I: For the United Kingdom
~
Depending on the country/region selected for “Country” (page 6), this option may not be available.
Channel
1Press F/f to select “Channel”, then press 
.
2Press F/f to select “S” (for cable channels) or “C” (for terrestrial channels), then press g.
3Tune the channels as follows:
If you do not know the channel number (frequency)
Press F/f to search for the next available channel. When a channel has been found, the search will stop. To continue searching, press F/f.
If you know the channel number (frequency)
Press the number buttons to enter the channel number of the broadcast you want or your VCR channel number.
4Press 
to jump to “Confirm”, then press 
.
Repeat the procedure above to preset other channels manually.
Label
Assigns a name of your choice, up to five letters or numbers, to the selected channel.
AFT
Allows you to
Functions MENU Using
Continued