Sony KDL-20G30xx Features menu, Power Saving, AV2 Output, RGB Centre, Timer, 23 GB

Features menu

Features
Power Saving	Standard
AV2 Output	TV
RGB Centre	0
Timer

Back: Select: Enter: Exit: MENU

You can select the options listed below on the Features menu. To select options in “Settings”, see “Navigating through menus” (page 19).

Power Saving	Selects the power saving mode to reduce the power consumption of the TV.
	“Standard”: Default settings.
	“Reduce”: Reduces the power consumption of the TV.
	“Picture Off”: Switches off the picture. You can listen to the sound with the picture
	off.
AV2 Output	Sets a signal to be output through the socket labelled			/	2 on the rear of the
	TV. If you connect a VCR to the	/	2 socket, you can then record from the
	equipment connected to other sockets of the TV.
	“TV”: Outputs a broadcast.
	“Auto”: Outputs whatever is being viewed on the screen. Not available for
	AV3.
RGB Centre	Adjusts the horizontal picture position so that the picture is in the middle of the
	screen.

	z
	This option is only available if an RGB source has been connected to the Scarts connectors
	1/	1 or	2/	2 on the rear of the TV.
Timer	Sets the timer to turn on/off the TV.

Sleep Timer

Sets a period of time after which the TV automatically switches itself into standby mode.

When the Sleep Timer is activated, the(Timer) indicator on the TV (front) lights up in orange.

z

• If you switch off the TV and switch it on again, “Sleep Timer” is reset to “Off”.

• “Sleep timer will end soon. Power will be turned off” appears on the screen one minute before the TV switches to standby mode.

Clock Set

Allows you to adjust the clock manually. When the TV is receiving digital channels, the clock cannot be adjusted manually since it is set to the time code of the broadcasted signal.

Timer

Sets the timer to turn on/off the TV. “Timer Mode”: Selects the desired period. “On Time”: Sets the time to turn on the TV. “Off Time”: Sets the time to turn off the TV.

Functions MENU Using

23 GB