Getting Started

Welcome to the World of TM

Thank you for purchasing this Sony LCD Digital Color Television. This manual is for model KDL-26S2000, KDL-32S2000, KDL40S2000 and KDL-46S2000. Be sure to check the supplied accesories against the list on page 46.

Connecting the TV

Started Getting
Cable System or VHF/UHF Antenna System

To display clear crisp pictures, you must connect your TV correctly and select the correct Wide Mode to display the picture in the correct aspect ratio (see “Changing the Wide Screen Mode” on page 21). It is strongly recommended to connect the antenna/cable input using the supplied 75-ohm coaxial cable to receive optimum picture quality signal. A 300-ohm twin lead cable can be easily affected by radio noise and the like, resulting in signal deterioration. If you use a 300-ohm twin lead cable, keep it as far away from the TV as possible.

You can also connect a variety of optional equipment to your TV (see page 14). For multiple equipment connections, please refer to the Quick Setup Guide.

Cable or VHF/UHF (or VHF only)

75-ohm coaxial

Rear of TV

cable (supplied)

 

VHF/UHF input

From Cable settings in Setup settings, select Cable On or Cable Off for your type of input signal.

(Continued)

11