Other Information

Preparation for Wall Mounting the KDL-26S2000 and KDL-32S2000

This TV can be installed on a wall by using a wall-mount bracket (sold separately). Before mounting the TV on a wall, the Table-Top Stand must be removed from the TV.

Do not remove the Table-Top Stand for any reason other than to wall- mount the TV.

Sony Wall-Mount

Bracket Model

SU-WL31

(KDL-26S2000/ KDL-32S2000)

Follow the simple steps below to remove the Table-Top Stand:

1Disconnect all the cables from the TV.

2Cover a level and stable surface with a thick and soft cloth.

3Gently lay the TV, face down, onto the cloth. Make sure the Table-Top Stand is hanging over the edge.

4Rotate the cable holder 90 degrees, and pull it out completely. [See illustration A]

5Remove the screws and detach the Table-Top Stand from the TV. [See illustration B] Be sure to hold the Table-Top Stand firmly while removing the last screw.

6Do not remove any other screws from the TV.

For bracket installation, refer to the instruction guide provided by the Wall- Mount Bracket model for your TV. Sufficient expertise is required in installing this TV, especially to determine the strength of the wall for withstanding the TV’s weight. For product protection and safety reasons,

Sony strongly recommends that you use the Wall-Mount Bracket model designed for your TV and the wall-mounting of your TV should be performed by Sony dealers or licensed contractors.

Information Other

Be sure to store the removed screws and Table-Top Stand in a safe place until you are ready to reattach the Table-Top Stand. Keep the screws away from small children.

43