Sony Viewing pictures from connected equipment, 18 GB, PROG, ANALOG, screen, screen, DIGITAL, Do this, Description, Description, Symbol on the, Symbol on the

Viewing pictures from connected equipment

Switch on the connected equipment, then perform one of the following operation.

For equipment connected to the scart sockets using a fully-wired 21-pin scart lead

Start playback on the connected equipment.

The picture from the connected equipment appears on the screen.

For an auto-tuned VCR/ DVD recorder

In analogue mode, press PROG +/-, or the number buttons, to select the video channel.

For other connected equipment

Press / to display a list of connected equipment. Press F/f to select the desired input source, then press .

The highlighted item is automatically selected if you do not perform any operation for two seconds after pressing .

If you have set an input source to "Skip" in the "AV Preset" menu (page 26), that input source does not appear in the list.

z

To return to normal TV mode, press DIGITAL or

ANALOG.

Symbol on the	Description
screen
AV1	To see the equipment connected to
	A.
AV2	To see the equipment connected to
	B.
	~
	SmartLink is a direct link between
	the TV and a VCR/DVD recorder.
AV3	To see the equipment connected to
	L.
HDMI 1	HDMI IN 1*.
	To see the equipment connected to
	D.
HDMI 2	HDMI IN 2*.
	To see the equipment connected to
	E.
	If the equipment has a DVI socket,
	connect the DVI socket to the
	HDMI IN socket through a DVI-
	HDMI adaptor interface (not
	supplied), and connect the
	equipment’s audio out socket to the
	audio in HDMI IN socket.

Symbol on the	Description
screen
HDMI 3	HDMI IN 3*.

To see the equipment connected to

K.

*~

•Be sure to use only an HDMI cable that bears the HDMI logo.

•When “Control for HDMI” compatible equipment is connected, communication with the connected equipment is supported. Refer to page 19 to set up this communication.

•When connecting an audio system with HDMI socket, be sure to also connect to the HiFi socket.

Component	To see the equipment connected to
	C.
PC	To see the equipment connected to
	H.
	z
	It is recommended to use a PC
	cable with ferrites, such as the
	"Connector, D-sub 15" (ref. 1-
	793-504-11, available in Sony
	Service Centre) or equivalent.

To connect Do this

Headphones M Connect to the i socket to listen to sound from the TV on headphones.

Conditional	To use Pay Per View services.
Access Module	For details, refer to the instruction
(CAM) I	manual supplied with your CAM. To
	use the CAM, remove the rubber
	cover from the CAM slot. Switch off
	the TV when inserting your CAM
	into the CAM slot. When you do not
	use the CAM, we recommend that
	you replace the cover on the CAM
	slot.
	~
	CAM is not supported in all countries.
	Please check with your authorized
	dealer.
Hi-Fi audio	Connect to the audio output sockets
equipment G		to listen to the sound from the
	TV on Hi-Fi audio equipment.
DIGITAL	Use an optical audio cable.
AUDIO OUT
(OPTICAL) F
USB J	Use USB memory to display photos.

Additional operations

To	Do this
Return to normal TV	Press DIGITAL or ANALOG.
mode

18 GB