Sony 8: Auto-tuningthe TV, 7 GB, RETURN, Guide up-Start, If a message appears for you to confirm the aerial connection

4 Press F/f to select the country/region in which you will operate the TV, then press .

Country		Analogue
	-
	United Kingdom
	Ireland
	Nederland
	België/Belgique
	Luxembourg
	France
	Italia
	Schweiz/Suisse/Svizzera
	Deutschland
Set		Back

If the country/region in which you want to use the TV does not appear in the list, select “-” instead of a country/region.

5 Press F/f to select the location type in which you will operate the TV, then press .

~

Sony recommends you to select “Home” for power saving.

Location		Analogue
	Home
	Shop

Set Back

This option selects the initial picture mode appropriate for the typical lighting condition in these enviroments.

8: Auto-tuning the TV

1 Select OK then press .

Auto Tuning Analogue

Do you want to start Auto Tuning?

OK	Cancel
Set	Back

2 Press F/f to select “Antenna” or “Cable”, then press .

If you select “Cable”, the screen for selecting the scan type appears. See “To tune the TV for Cable connection” (page 8).

The TV starts searching for all available digital channels, followed by all available analogue channels. This may take some time, so do not press any buttons on the TV or remote while proceeding.

If a message appears for you to confirm the aerial connection

No digital or analogue channels were found. Check all the aerial/cable connection and then press to start auto-tuning again.

3 When the Programme Sorting menu appears on the screen, follow the steps of “Programme Sorting”(page 28).

If you do not change the order in which the analogue channels are stored on the TV, press RETURN to go to step 4.

4

Quick StartAnalogue

Do you want to enable Quick Start?

TV turns on more quickly but standby power

consumption is increased.

Yes	No
Set	Back
For details, see page 24.
5
Control for HDMI	Analogue
Do you want to enable control for compatible
HDMI devices?
Yes	No
Set	Back

For details, see page 19.

6 Press .

The TV has now tuned in all the available channels.

~

When a digital broadcast channel cannot be received, or when selecting a region in which there are no digital broadcasts in step 3 (page 7), the time must be set after performing step 3.

Guide up-Start

7 GB