| Screen Settings | “Screen Format”: For details about the screen format, see “To change the | |
| screen format manually to suit the broadcast” on page 14. | |
| “Auto Format”: Automatically changes the screen format according to the | |
| broadcast signal. To keep your setting, select “Off”. | |
| “Display Area”: Adjusts the picture display area in 1080i/p and 720p sources | |
| when "Screen Format" is set to "Wide". | |
| • “Auto”: During digital broadcasts, displays pictures in accordance with the | |
|
| settings recommended by the broadcast station. |
| • “Full Pixel”: Displays pictures in their original size. | |
| • “Normal”: Displays pictures in their recommended size. | |
| “Horizontal Shift”: Adjusts the horizontal position of the picture. | |
| “Vertical Shift”: Adjusts the vertical position of the picture when “Screen | |
| Format” is set to “Smart”, “Zoom” or “14:9”. | |
| “Vertical Size”: Adjusts the vertical size of the picture when “Screen Format” is | |
| set to “Smart”. | |
|
| |
| PC Settings | “Screen Format”: Selects a screen format for displaying input from your PC. | |
| • “Full 1”: Enlarges the picture to fill the vertical display area, keeping its | |
|
| original |
| • “Full 2”: Enlarges the picture to fill the display area. | |
| “Reset”: Resets the PC screen settings to the factory settings. | |
| “Auto Adjustment”: Automatically adjusts the display position, phase and pitch | |
| of the picture when the TV receives an input signal from the connected PC. | |
| z |
|
| “Auto Adjustment” may not work well with certain input signals. In such cases, | |
| manually adjust “Phase”, “Pitch” and “Horizontal Shift”. | |
| “Phase”: Adjusts the phase when the screen flickers. | |
| “Pitch”: Adjusts the pitch when the picture has unwanted vertical stripes. | |
| “Horizontal Shift”: Adjusts the horizontal position of the picture. | |
| “Power Management”: Switches the TV to standby mode if no signal is | |
| received for 30 seconds in the PC input. | |
|
| |
| AV | “AV Preset”: Assigns a name to any equipment connected to the side and rear | |
| sockets. The name will be displayed briefly on the screen when the equipment is | |
| selected. You can skip an input source that is not connected to any equipment. | |
| 1 | Press F/f to select the desired input source, then press . |
| 2 | Press F/f to select the desired option below, then press . |
•
• “Edit:”: Creates your own label.
1 | Press F/f to select the desired letter or number (“_” for a blank space), |
| then press g. |
| If you input a wrong character |
| Press G/g to select the wrong character. Then, press F/f to select the correct |
| character. |
2 | Repeat the procedure in step 1 until the name is completed. |
3 | Select “OK”, then press . |
• “Skip”: Skips an input source that is not connected to any equipment when you press F/f to select the input source.
“AV2 Input”: Sets a signal to be input through the socket labelled | / | / |
AV2 on the rear of the TV. |
|
|
•“Auto”: Switches automatically among the signals of RGB input, S video input, Composite video input depending on the input signal.
•“RGB”: Inputs the RGB signal.
•“S Video”: Inputs the S Video signal.
•“Composite”: Inputs the Composite video signal.