Using Features

Using BRAVIA Sync with Control for HDMI

The BRAVIA Sync function allows this TV to communicate with other Sony equipment supporting the Control for HDMI function.

To connect Sony equipment with Control for HDMI

Use an HDMI cable that bears the HDMI logo for connection. See the HDMI connection shown in the Quick Setup Guide provided with the TV documentation.

Setting the Control for HDMI

The Control for HDMI function must be set up in order for the TV to communicate with other Control for HDMI enabled equipment. See page 36 for information on how to set up this TV’s Control for HDMI function. For other equipment, refer to its operating instructions.

Available options using Control for

HDMI

The following operations are available after you connect the supported Sony equipment with Control for HDMI function to your TV:

•Automatically turn off the connected equipment when you turn off the TV.

•The TV will automatically turn on with the respective HDMI input.

•The connected equipment is turned on by One-Touch-Play.

•Possible operations with BRAVIA Sync buttons, see page 18.

When a Sony A/V receiver with BRAVIA Sync is connected, the following additional operations are possible:

•Turning on the A/V receiver when the TV is turned on.

•Automatically switching to the audio output of the A/V receiver’s attached speakers.

•Adjusting the volume and muting of the A/V receiver with the TV’s remote control.

Features Using

21