Getting Started

1. Installing the TV

Preventing the TV from Toppling Over

TV

Table-Top Stand

Getting

stand

2

3

1

1Screw the support belt (supplied) to the TV stand with a wood screw (supplied).

2Attach the support belt to the Table-Top Stand with the securing screw (supplied) using a coin, etc.

3Adjust the length by pulling the support belt toward you while holding the Table-Top Stand.

~

•Be sure to take measures to prevent the TV from toppling over and causing injury.

•The supplied wood screw may not be used depending on the type of TV stand. In this case, or when the

securing strength is not enough, use commercial screws 1/8 to 3/16 inch (3 to 4 mm) diameter to fit to the

TV stand. Consult your dealer about the types of screw(s).

Started

11