Auto Wide

On

Automatically changes Wide Mode setting based upon content. If

 

 

frequent screen changes are disturbing to you, select Off.

 

 

 

 

Off

Turns off the Auto Wide option. Choose a Wide Mode from the

 

 

Wide Mode option.

4:3 Default

Select the default screen mode to use for 4:3 sources

Wide Zoom

Enlarges the 4:3 picture to fill the 16:9 screen, displaying as much of

 

the original image as possible.

 

 

Normal

Displays the 4:3 picture in its original aspect ratio.

 

 

Full

Select to enlarge the 4:3 picture horizontally only, to fill the screen.

 

 

Zoom

Select to enlarge the picture horizontally and vertically to fill the

 

screen while maintaining the aspect ratio.

Off

Select to continue using the current Wide Mode setting when the

 

channel or input is changed.

~

•This option is not available if Auto Wide is set to Off.

•If 4:3 Default is set to anything but Off, the Wide Mode setting applies only to the current channel. When you change channels (or inputs), Wide Mode is automatically replaced with the 4:3 Default setting for 4:3 sources. To retain the current Wide Mode setting as channels and inputs are changed, set 4:3 Default to Off.

Display Area

Normal

Displays the picture in its original size.

 

-1/-2

Enlarges the picture to hide the edge of the picture.

 

 

Screen Position

Adjust the Vertical positioning by pressing the V/v buttons. Press the B/b buttons to

 

adjust the Horizontal positioning.

~

•Screen Position option is available for standard-definition signals only. Vertical adjustment is available only when Wide Mode is set to Zoom.

•Screen Position feature is useful if the TV is connected to game equipment.

Vertical Size

Adjusts the vertical size of the picture. (Available only in Wide Zoom and Zoom.)

 

Press B/b and press to adjust.

 

 

Screen settings for PC timings (HDMI or PC input) differ from all other input modes and are shown below.

Auto Adjust

Select Yes to start the auto adjust to display the PC input.

Reset

Resets the current screen settings to the default values.

 

 

Phase

Adjust after Pitch to fine tune overall sharpness.

 

 

Pitch

Adjust uneven sharpness on screen.

 

~

 

• For the PC input Signal Reference Chart, see page 18.

 

 

H Center

Allows you to move the position of the picture horizontally (left and right).

 

To Adjust the H Center

 

Press V/v to highlight H Center and press .

 

Press B/b to correct the centering then press .

 

 

V Center

Allows you to move the position of the picture vertically (up and down).

 

To Adjust the V Center

 

Press V/v to highlight V Center and press .

 

Press B/b to correct the centering then press .

 

 

Features TV Using

(Continued)

33