11
Setting up your TV
3Anchor the TV to the Wall
Anchor the TV to the wall by using bolts, wall
anchor and chain (or rope).
~
• Your TV is shipped with screws attached to the
rear of the TV. (They are fastened in the screw
holes for wall mounting.) Be sure to remove the
upper two screws prior to anchoring the TV on a
wall.
• Securing the TV to the stand without securing
the TV and the stand to the wall provides
minimum protection against the TV toppling
over. For further protection, be sure to follow the
three measures recommended.
Organizing the AC power
cord
Running initial setup
1Complete your cable connections
before proceeding with the Initial
Setup.
Connect the TV to your nearest power
outlet.
2Check the ENERGY SAVING
SWITCH setting is on (z).
3Press POWER on the TV.
When you switch the TV on for the first
time, the Language menu appears on
the screen.
4Follow the instructions on the screen.
~
•The ENERGY SAVING SWITCH must be
on (z) to set the clock and obtain program
information for the TV Guide.
•Home mode sets the TV to display the settings
optimized for home viewing (this setting is
ENERGY STAR compliant).
5Select Continue to scan for available
channels and enable the TV Guide On
Screen® feature. If you receive channels
from a cable box or satellite receiver
and do not wish to use the TV’s built-in
tuner, select Skip.
Selecting Skip will disable the TV Guide
On Screen feature, which is only
available when the TV’s tuner is used.
~
•If you skip the channel scan while in the setup
menus, TV Guide will be disabled.
Anchor bolts (not supplied)
Wall-
mount
holes
Rope
or
chain
(not
supplied)
Wall-anchor
(not supplied)
POWER