Star Micronics XR-1020 Set vertical tab stops every n lines, Select vertical tab channel, 1 and

Set vertical tab stops every n lines

Mode	ASCII				Decimal			Hexadecimal
Std.	cESC>	“err	“1”	n	27 101	46	n	1B	66	31	n
	cESC>	“e”	cl>	n	27 101	1	n	16	66	01	n

	Cancels all current vertical tab stops and sets new tab stops every n
	lines, where n is between	1 and 127.						-
Set vertical tab stops in channel
IMode ASCII		Decimal			Hexadecimal		-	-
Both	cESC> “b” n0 nl	27 98	n0	nl	1B 62 n0	nl
	n2 .. ..	COB	n2	.... 0	n2	. 00		-

Cancels all current vertical tab stops in channel n0, (where n0 is between 0 and 7) and sets new vertical tab stops in this channel. (A channel is a set of vertical tab stops selected by the 4330 ‘T command.) See &SC, “B” for parameters nl, n2, ... co>.

Select vertical tab channel

Mode	ASCII	Decimal	Hexadecimal
Std.	cESC> ‘T’ n0	27 47 n0	18 2F no

Selects a set of vertical tab stops designated by a channel number (n0) from 0 to 7. The tab stops in each channel am set by <ES0 “b”.

Vertical tab

Mode	ASCII	Decimal	Hexadecimal	.-
Both	<VT>	11	06

Feeds the paper to the next vertical tab stop and moves the print position to the left margin. Performs a line feed if no vertical tabs are set, as at power-up. Feeds to the top of the next page if vertical tabs are set but the current line is at or below the last vertical tab stop.