Star Micronics XR-1020, XR-1520 manual Print menu

•IBM Character Table

If you selected IBM mode, you can select either character set #l [IBM #l ] or #2 [*IBM #2].

Character set #2 is for computers with an 8-bit interface (the most common kind), and set #l is for computers with a 7-bit interface.

•IBM Code Page

Except in the Standard Italic character set, this switch selects the default

character code page.

•International Character Set

International character sets differ in their assignment of 14 character codes in the Standard Italic character set.

Print menu

This menu allows you to set up various printing options which will be automatically selected whenever you turn the printer on.

•Print Quality

Select the print quality.

HS Draft, [HS-DRAFT],prints with the highest speed, but the dot matrix is reduced to print faster. Draft [*DRAFT] has a reduced dot matrix compared to NLQ, but the print quality is better than the HS Draft.

Near Letter Quality is refered as [NLQ], and there are many font styles as shown in the “NLQ Font” menu.

•Print pitch

Selects the default print pitch, such as [*l OCPI] (pica), [12CPI](elite), and

[PROPORTIONAL].

•Condensed print

Selects condensed print to be either [*DISABLED] or [ENABLED].

•Italic print

Selects to print all characters with Italic style, or not.

This is different from the italic characters in the Standard Italic character table.

-

-

60