Star Micronics XR-1020, XR-1520 manual Setting Up, Mounting the platen knob

-

SETTING UP

Place the printer in the desired location, and remove all packing material from inside the printer cover. This packing material is intended to prevent damage to the printer while in transit. You will want to keep all the packing material, along with the printer carton, in case you have to move the printer to a new location.

Mounting the platen knob

The platen knob is packed into an accessory box with other accessories for the Wide carriage printer.

NOTE : For the Normal carriage printer, the platen knob is mounted on the printer at factory.

Mount the knob on the platen shaft, which is located on the right-hand side of the printer. Rotate the knob on the shaft before pushing the knob fully into position.

-

-

-

‘4

Platen knob

Flgurr 2-2 Mount the platen knob.

8