Star Micronics XR-1020 Set page length to n lines, Set page length to n inches, Set bottom margin

Set page length to n lines

Mode	ASCII	Decimal	Hexadecimal
Both	cESC> “c” n	27 67 n	1B 43 n

Sets the page length to n lines in the current line spacing, where n is

between 1 and 127 in Standard mode or between 1 and 64 in IBM mode. Changing the line spacing later does not alter the physical page length. The current line becomes the top of the page.

Set page length to n inches

-~

Mode

Both

ASCII	Decimal	Hexadecimal		-	---
<ESC> “C” CO> n	27 67 0 n	lB4300	n

Sets the page length to n inches, where n is between 1 and 32 in Standard mode or between 1 and 64 in IBM mode. The current line becomes the top of the page.

Set bottom margin

Mode	ASCII	Decimal	Hexadecimal
Both	cESC> “IT’ n	27 70 n	1B 4E n

Sets the bottom margin to n lines, where n is between 1 and 127 in Standard mode or between 1 and 255 in IBM mode. The bottom margin is reset when you change the page length.

Cancel bottom margin

Mode	ASCII	Decimal	Hexadecimal
			-

Both	<ESC> “0”	27	79	1B	4F
					-
	Cancels the bottom margin.
Form feed
Mode	ASCII	Decimal		Hexadecimal
Both	<FF>	12		oc

Feeds the paper to the top of the next page according to the current page length, and moves the print position to the left margin. When the automatic sheet feeder (ASF) is selected with Memory Switch setting, this command ejects the current page.

82