Star Micronics XR-1520, XR-1020 manual Enable printing of all character codes, Select slash zero

Enable printing of all character codes

I.

..-

IMode 1	ASCII		I	Decimal	I Hexadecimal	I
1IBM I	<ESC> ‘Y’ nl	n2	I	27 92 nl ni?	1 1B 5~ nI d	I

Enables printing of all characters in the IBM character set, including those assigned to character codes which are normally considered control codes. This command remains in effect for the next nl + n2

x256 characters, where nl and n2 are numbers between 0 and 255. During this interval no control functions are executed. If a code with no assigned character is received, the printer prints a space.

Enable printing of all character codes on next

L	character
	Mode	ASCII	Decimal	Hexadecimal
	IBM	cESC> “A” n	27 94 n	1B !iE n

This command operates like <ES0 ‘T’ except that it remains in effect for only one character.

c

1

i.

Select slash zero

Mode	ASCII		Decimal		Hexadecimal
Std.	cESC>	LL_W 6‘*.	27126	49	1B	7E	31
		1
	cESC>	“.%” <l>	27126	1	1B	7E	01

Causes subsequent zero characters to be overprinted with a slash ($3).

Select normal zero

Mode ASCII		Decimal		Hexadecimal
<ESC>	“_W 6‘09.	27126	48	1B	7E	30
Std.	a‘...<o>"	27126	0	1B	7E	00
<ESC>

Causes subsequent zero characters to be printed normally (0), without a slash.