Star Micronics XR-1020, XR-1520 manual Print normal-density graphics, Print double-density graphics

/	GRAPHICS COMMANDS
I
t	Print normal-density graphics
	Mode ASCII			Decimal		Hexadecimal
	Both	cESC> “K” nl	n2	27 75 nl	n2	10 40 nl n2
		ml	m2 ...	ml	m2 ...	ml tn2 ...
		Prints bit-image graphics at 60 dots per inch horizontally. The
		graphic image is 8 dots high and nZ +n2 x 256 dots wide. Maximum					_
		width is 8 inches (480 dots) for normal carnage printer, and 13.6
		inches (816 dots) for wide carriage printer. ml,				m2, ... are the dot -	-

data, each a l-byte value from 0 to 255 representing 8 vertical dots, with the most significant bit at the top and the least significant bit at the bottom. The number of data bytes must be nZ +nZ x 256. Dots beyond the right margin are ignored. At the end of bit-image printing the printer returns automatically to character mode.

Print double-density graphics

Mode

Both

ASCIIDecimalHexadecimal

<ESC> “L” nl	n2		27 76 nl	ti?	10 4C nl	n2
ml	m2	...	ml	m2 ...	ml	m2 ...

F%nts bit-image graphics at 120 dots per inch horizontally (maxi- mum 960 dots wide for nonnal carriage printer, 1632 dots for wide carriage printer). See <ESC> “K” for other information.

Print double-density, double-speed graphics

[Mode 1 ASCII1 Decimal 1 Hexadecimal 1 -

Both	<ESC> “Y” nl	n2		27 69 nl	n2	10 S	nl n2
	ml	m2	...	ml	m2 ...	ml	m2 ...

prints bit-image graphics at 120 dots per inch horizontally (maxi- mum 960 dots wide for normal carriage printer, 1632 dots for wide carriage printer), skipping every second dot in the horizontal direction. See &SC> “K” for other information.

90